Foust Marketing—Pipe Beveling Tools

Foust Marketing offers a complete line of pipe installation tools including beveling tools.

Beveling Tools

  • DEB1IPS—1/2”, 3/4”, 1”
  • DEB2—Up to 2
  • DEB4—1 1/4” – 4”
  • PB-200—2” and larger

Beveling Tips

  • Remove inside diameter burrs or raised beads with an internal deburring tool or knife. Remove the burrs or raised beads on the outside diameter of the pipe by using a file or external deburring tool,
  • Check the end of the pipe. If the tubing cutter has formed a raised bead, it must be removed.
  • Remove any rough or raised edges caused by sawing or cutting. This can be done with a file, deburring tool, knife or reamer.   Burrs or raised beads on the outside of the pipe can scrape channels in the cement layer and softened surfaces, and can cause leaks.
  • A chamfer or beveled edge at about 25º and 3/32” on the outside of the pipe is recommended to avoid pipe scraping channels in the cement layers and softened surfaces.

For complete installation instructions, download the flyer at Guide to Solvent Cementing.