Arkema Kynar® PVDF For Chemical Applications

September 15, 2017 – The Woodlands, TX – Arkema has been #1 producer of PVDF since 1963.  Kynar® is the trademark of Arkema and typically produced in powder or pellets for extrusion or molding applications. Engineers, chemists, designers, and manufacturers have many material choices for chemical handling.  One of the most chemically resistant family of... Read More

SCIGRIP 55 and 58 Polycarbonate Adhesives

September 1, 2017 – The Woodlands, TX – SCIGRIP® 55 and 58 are formulated for bonding a wide variety of thermoplastics, including polycarbonate, cellulose acetate butyrate, PETG, buffed acrylic, ABS, PVC, polyurethane and foam board to themselves and one another.  SCIGRIP 55 and 58 are recommended for a variety of applications in the sign assembly... Read More

Pulsafeeder—NSF 61 Certified Pumps and Water Meters

August 15, 2017 – The Woodlands, TX – If you manufacture, sell or distribute water treatment or distribution products in North America, your products are required to comply with NSF/ANSI 61: Drinking Water System Components – Health Effects by most governmental agencies that regulate drinking water supplies.  Developed by a team of scientists, industry experts... Read More

IPS Weld-On—Hot Weather Tips for Solvent Cementing Pipe

August 1, 2017 – The Woodlands, TX – There are many occasions when solvent welding plastic pipe in 95°F (35°C) temperature and above cannot be avoided.  However, by using Weld-On solvent cements and by following  our standard instructions with a little extra care as outlined below, successful leak-proof joints can be made in even the... Read More

SCIGRIP 4807 for Bonding High Impact Styrene

July 1, 2017 – The Woodlands, TX – SCIGRIP® 4807 is formulated to form high strength bonds in joining general purpose and high impact types of styrene.  SCIGRIP 4807 is suitable for a wide variety of applications.  It may be used on both large and small assemblies, large displays, signs, lighting fixtures, housewares, large and... Read More

Gallina—The Polycarbonate Sheets and Systems Leaders

June 20, 2017 – The Woodlands, TX – For over 50 years, Gallina has been designing and manufacturing plastic glazing products that are recognized for innovation, quality, and durability. Gallina USA offers its full line of Polycarbonate products to architects, designers, fabricators, distributors and contractors in North America.  Gallina’s Policarb® and arcoPlus® product lines provide complete glazing... Read More

Pulsafeeder—Black Polyethylene Tubing for Outdoor Applications

June 10, 2017 – The Woodlands, TX – PULSAtron chemical metering pumps continues to set the standard in the industry.  PULSAtron can handle a variety of gaseous solutions.  The PULSAtron family consists of flow rates from 3 GPD to 600 GPD. Most models include standard bleed valve assembly, foot strainer, injection valve and tubing.  No... Read More

King Plastic—Privacy Panels Made with King StarBoard

June 10, 2017 – The Woodlands, TX – Initial Situation – The animal shelter needed major kennel improvements to reduce stress and keep dogs calm. Some of the improvements included painting the ceiling and walls, and setting up the cat area so the cats would not hear much barking from the dogs. The shelter found... Read More

IPS Weld-On—Thread Sealants and More!

May 20, 2017 – The Woodlands, TX – IPS Weld-On—Your single source supplier of Thread Sealants, Compounds, and Lubricants. Many installations and final connections require their own sealants, putty lubricants and other compounds to complete the job.  IPS Weld-On offers these products that exceed industry standards. Sealants All Seal Blue Seal with Teflon® White Seal... Read More

Pulsafeeder—New PEPkit Pump Enhancement Parts Kit

May 10, 2017 – The Woodlands, TX – What’s better than a our standard KOPkit—Keep on Pumping Kit?  A PEPkit of course! The New PEPkit, which stands for Pump Enhancement Parts Kit, includes all of the essential parts needed to keep a pump running like new.  When performing maintenance on a metering pump it is... Read More

Foust Marketing Receives Outstanding Sales Achievement Award

May 1, 2017 – The Woodlands, TX – The Foust Marketing team was presented with the Outstanding Sales Achievement Award for 2016 at the Pulsafeeder Global Sales Meeting.  To qualify, the Pulsafeeder sales representative had to exceed previous year sales and meet an annual growth goal set at beginning of the year with a key... Read More

King Plasti-Shield—Borated Polyethylene Neutron Shielding Sheet

April 20, 2017 – The Woodlands, TX – King Plasti-Shield® is an effective shielding material with 5% boron by weight and our trademark purple color to meet all applicable applications for healthcare cancer treatment centers, diagnostic and hospital facilities.  Applications include linear accelerators, nuclear or radiation shielding, industrial use, security such as seaports and airport... Read More

Foust Marketing—New Improved Portable Pipe Beveller

March 1, 2017 – The Woodlands, TX – Foust Marketing now offering New Improved Cordless Power Beveller for plastic pipe.  All plastic pipe joints must be beveled prior to installation.  Beveling the pipe is an important step in the proper solvent cementing techniques.  This can be accomplished easily with the PB-200 Portable Power Beveller available... Read More

NIBCO—Chemtrol Piping Systems for Tough Environments

February 15, 2017 – The Woodlands, TX – Tough industrial environments require the utmost reliability in flow control processes.  That’s why Chemtrol® is known for its premium line of industrial flow control products.  As the leading authority in flow-control systems for more than 60 years, Chemtrol delivers superior performance and reliability where it really counts. ... Read More

Pulsafeeder—PTSA Probe for Cooling Tower Controller

February 1, 2017 – The Woodlands, TX – Pulsafeeder continues to lead the industry with quality metering pumps, controllers, and systems.  The New MicroVision EX cooling tower controllers offer measurement options for conductivity, pH, ORP, and PTSA with available 4-20mA input. PTSA is a fluorescent dye used for measurement and monitoring of water systems.  Fluorescents... Read More

IPS Weld-On—Easy Twist™ Can Opener

January 1, 2017 – The Woodlands, TX – The NEW Weld-On Easy Twist is ergonomically designed to easily open the cans of cleaners, primers, and solvent cements in a simple twist without damaging the cap.  When closing the can, Easy Twist helps tighten and seal the cap with an extra torque.  This prevents the solvent... Read More

Syracuse University Lockers Made with King StarBoard® ST

December 15, 2016 – The Woodlands, TX – Syracuse University remodeled the lacrosse men’s locker room.  The old lockers made from metal were replaced with King StarBoard® ST, a high-density polyethylene (HDPE) material.  Each of the 58 lockers have a cubbyhole for shoes, a digital lock box with outlets, stick rack, customized hooks for lacrosse... Read More

Pulsafeeder—Digital Glycol Feeders

December 1, 2016 – The Woodlands, TX – Glycol is especially necessary for chiller condenser water and cooling towers when the cooling tower is used in the winter time.  The glycol prevents the water from freezing in extremely cold weather.  Pulsafeeder’s Digital Glycol Feeder provides a consistent operating pressure in closed loop systems.  This allows... Read More

Harrison Duct Used for Odor Control Applications

November 1, 2016 – The Woodlands, TX – Harrison Machine & Plastic Superduct® piping systems are custom fabricated to specifications. Harrison Superduct® is offered from 2″ to 60″ and available in PVC, CPVC, PP, PVDF, and HDPE materials. Sewage and industrial plants located near residential areas can be subject to many issues if these facilities... Read More

IPS Weld-On 724 Chemical Resistance for Wastewater Industry

October 15, 2016 – The Woodlands, TX – Industrial and wastewater environments are very demanding with respect to the life expectancy of the piping connections. The need to withstand mechanical, thermal and chemical stresses in PVC and CPVC plastic piping systems necessitates greater joint strength than is possible with non-industrial cements. Specially formulated for joining... Read More

Pulsafeeder—Series MP Microprocessor Controlled Pump

October 1, 2015 – The Woodlands, TX – Pulsafeeder PULSAtron metering pumps are used in a variety of municipal drinking water and wastewater applications to add treatment chemicals for disinfection, pH control, polymers, and more. The PULSAtron Series MP is a true microprocessor controlled instrument for precise and accurate metering control.  The Series MP pump... Read More

Chemtrol—Ideal for Wastewater Treatment Systems

September 20, 2016 – The Woodlands, TX – Industrial wastewater can be laden with chemicals, toxins, and pollutants that must be treated properly before it is discharged to the environment or to a municipal wastewater treatment facility. Now, consider the benefits of using Chemtrol thermoplastic pipe, valves and fittings.  Chemtrol thermoplastics can be applied to... Read More

Gallina—Policarb® Policomp® Filters IR

September 1, 2016 – The Woodlands, TX – Gallina’s IR products absorb the part of the light relative to the infrared rays, blocking effectively the solar heat, while letting the solar light through. The result is a reduction of the internal transmission of heat and a reduction of cost for cooling the area. In fact... Read More

IPS Weld-On®—New Roof Top Blox

August 20, 2016 – The Woodlands, TX – Roof Top Blox are the perfect solution for supporting piping and equipment on flat commercial roofs.    Engineered with contractors in mind, the Roof Top Blox system is designed to be quickly installed, expanded, and adjusted from just the top side! Their revolutionary roof top support block system... Read More

Pulsafeeder—Chem-Tech XP Peristaltic Timer Pump

August 10, 2016 – The Woodlands, TX – The Chem-Tech Series XP pump with peristaltic technology delivers worry-free dosing in a modern design.  Each and every component of the Series XP  is designed and manufactured for optimum reliability and durability for REAL performance. The XP Timer model pump includes Digital 7 Day – 8 Event... Read More

King StarBoard® AS—The Anti-Skid Marine-Grade Polymer Sheet

July 20, 2016 – The Woodlands, TX – King StarBoard® AS is a sure-grip, marine-grade, decking material designed specifically for high-traffic areas. This unique product features a special high-friction surface polymer in a diamond or dot pattern to prevent slipping and promote drainage.   In addition to traditional marine and commercial swimming pool applications, King StarBoard®... Read More

NIBCO—Red Kynar® PVDF Piping System

July 15, 2016 – The Woodlands, TX – NIBCO (Chemtrol) manufactures red and natural Kynar® PVDF piping components. PVDF is a tough, abrasion resistant fluorocarbon material with maximum service temperature of 280°F. Chemtrol red PVDF was recently installed at an OEM for a sodium hypochlorite system.  The red PVDF was specified because the basic PVDF... Read More

King Plastic—Online Resource Center

July 1, 2015 – The Woodlands, TX – Access to The Sales Tools You Need, When You Need Them The Online Resource Center was created to provide you with the online sales tools you need, anywhere, anytime.  Click on the photo to the left or visit the following link:  King Plastic Online Tutorial Video Items such... Read More

IPS Weld-On—810/811 High-Strength Adhesives

June 20, 2016 – The Woodlands, TX – IPS Weld-On 810/811 Adhesives are great for repairs, fabrication, and bonding of pipes and fittings. Strong Bonds Bonds ABS, styrene, acrylic, fiberglass, concrete, clay and other materials to themselves or to dissimilar materials. Withstands pressure and temperature range (-30° to 200°F). Great for repairing cracks and leaky... Read More

Pulsafeeder—New Conductivity Probe Tee

June 10, 2016 – The Woodlands, TX – Pulsafeeder continues to lead the industry with quality chemical metering pumps, controllers, and panel mount systems for water treatment of cooling tower and boiler water.  With the recent release of the NEW MicroVision EX controllers for conductivity, pH, and ORP, Pulsafeeder is pleased to announce the release... Read More

King ColorCore® Ideal for Sign Industry

May 10, 2016 – The Woodlands, TX – King ColorCore® is a versatile, environmentally stabilized sheet with multiple layers of contrasting colors. Its thin cap layers and bright primary colors make it ideal for sign industry. For maximum versatility, standard colors are made to coordinate with King ColorBoard®.  King ColorCore® is easy to engrave and... Read More

Foust Marketing Receives Outstanding Sales Achievement Award

May 1, 2016 – The Woodlands, TX – The Foust Marketing team was presented with the Outstanding Sales Achievement Award this February at the Pulsafeeder Global Sales Meeting.  To qualify, the Pulsafeeder sales representative had to exceed previous year sales and meet a minimum annual growth goal set at beginning of the year.  In addition... Read More

IPS Weld-On—Solvent Cement Welding and Bonder Qualification

April 20, 2016 – The Woodlands, TX – IPS Weld-On offers ASME B31.3  bonder qualification for the solvent welding process in accordance with ASTM D2855.  The class covers the following: Basic principles of solvent welding. Proper techniques for solvent welding plastic joints. Importance of correct sized applicators. Set and cure times. Solvent welding tips –... Read More

Pulsafeeder—Panel Mount Systems

February 20, 2016 – The Woodlands, TX – Pulsafeeder’s wall mountable panel systems are designed to provide complete chemical feed solutions for chemical dosing applications. From economical, single pump and flow assembly packages to multiple pump panels with microprocessor-based controllers with in-line sensors, there is a panel mount solution for your application. Institutional: Cooling Tower... Read More

King MediGrade—The Antimicrobial Polymer Sheet

February 10, 2016 – The Woodlands, TX – King MediGrade™ is a super tough polymer sheet with an exclusive antimicrobial additive from Biosafe®, the latest technology for protecting the product surface against stain and odor causing bacteria, algae and fungi. The antimicrobial agent is bonded at the molecular level and will not leach out of... Read More

Chemtrol PP and PVDF Piping System Extended Warranty

December 20, 2015 – The Woodlands, TX – Chemtrol is pleased to announce the NEW extended warranty program for their Engineered Plastics piping systems including PP and PVDF. When Chemtrol pressure-rated pipe, valves and fittings are ordered and used together in an all Chemtrol system, then Chemtrol warrants each pipe, valve and fitting in that... Read More

MicroVision EX Series Cooling Tower Controllers

December 10, 2015 – The Woodlands, TX – Pulsafeeder is pleased to announce the first release of the NEW MicroVision EX Cooling Tower Controllers. MicroVision EX is an expansion of the proven performance and simplicity of programming of the standard MicroVision controller. MicroVision EX is a microprocessor-based conductivity controller with added pH and ORP options... Read More

King Hy-Pact®—The Super Tough Industrial Polymer Sheet

December 1, 2015 – The Woodlands, TX – King Hy-Pact® is the super tough industrial polymer sheet that is environmentally stabilized with excellent physical properties and is a cost effective material. Tests have shown after 2,000 hours of UV exposure, King Hy-Pact outperforms both UV stabilized HDPE and UHMW with superior toughness in wear resistance,... Read More

Products Featured at WEFTEC in Chicago

November 15, 2015 – The Woodlands, TX – Foust Marketing recently attended the WEFTEC (Water Environment Federation) show in Chicago.  WEFTEC is the largest annual water and wastewater show in North America.  We were there to support our quality manufacturers and partners: Pulsafeeder, NIBCO (Chemtrol), and IPS Weld-On. Pulsafeeder featured their new BLACKLINE Series MD... Read More

Weld-On Toolbox—New Innovative App for Smartphones

November 1, 2015 – The Woodlands, TX – Weld-On Adhesives is proud to launch the Weld-On Toolbox mobile application for iPhone and Android smartphones.  This innovative app introduces practical usage calculators, unprecedented in the industry, which allow users to estimate solvent cement set/cure times, as well as the amount of cement and primer needed for... Read More

Pulsafeeder BLACKLINE Series MD Pump Provides Solution

October 20, 2015 – The Woodlands, TX – The new Pulsafeeder BLACKLINE Series MD is a motor driven, spring return mechanical diaphragm metering pump for precise and accurate metering control. The Series MD includes oil lubricated ball bearings, long life reinforced PTFE diaphragm, micrometer style stroke length adjuster and many liquid end material options to... Read More

Harrison Machine & Plastic—Quality Fabrication

October 5, 2015 – The Woodlands, TX – Established in 1970, Harrison Machine & Plastic Corporation is involved in the fabrication and distribution of plastics primarily to the industrial market, where fluid and air handling systems are used in extremely corrosive environments. Harrison can custom fabricate your large diameter pressure, drainage, and duct fittings from... Read More

Pulsafeeder MicroVision Boiler Controller

September 20, 2015 – The Woodlands, TX – As the cooling season slows, the maintenance and control of boilers can have a significant impact on water quality. The MicroVision Boiler Controller delivers comprehensive boiler water control with plug-and-play simplicity, at an outstanding value. This latest addition to the MicroVision family of controllers is configured specifically... Read More

IPS Weld-On Introduces New SuperDauber Applicator

September 10, 2015 – The Woodlands, TX – Weld-On is excited to announce a NEW accessory to their product line.  The SuperDauber™ is a newly engineered dauber with fully adjustable telescopic stem, easy-grip ribbed handle and shed-resistant dauber material. The SuperDauber complements IPS Weld-On’s complete line of accessories including the innovative SuperSwab for larger diameter applications. SuperDauber... Read More

King PipeGrade® Industrial HDPE Sheet

September 1, 2015 – The Woodlands, TX – King PipeGrade® is a special black polyethylene material for the pipe industry. It is available in sheets, slabs, and massive shapes. King PipeGrade® is PE 4710 – PE 100 material, which is compliant to ASTM 3350 as a standard material. ASTM 3350/4710 PE 100 is completely compatible and... Read More

SCIGRIP 45 Adhesive Outperforms Competition

August 21, 2015 – The Woodlands, TX  – SCIGRIP 45 is a fast curing, two-component, low VOC, reactive structural adhesive formulated for bonding a wide variety of metals, plastics, wood, concrete, brick, fiberglass, and many other substrates.  SCIGRIP 45 outperforms the competition when lap shear strengths were tested with a variety of materials including aluminum,... Read More

Gallina Used at Livestrong Sporting Park

July 1, 2015 – The Woodlands, TX – For over half a century, Gallina USA has been designing and manufacturing plastic glazing polycarbonate products that are well recognized with architects, designers, fabricators, distributors and contractors. Gallina USA’s Policarb® 25mm 3-wall clear sheet was used for canopies that cover the Livestrong Sporting Park in Kansas City,... Read More

Pulsafeeder BLACKLINE Series MD Chemical Metering Pump

June 15, 2015 – The Woodlands, TX – The BLACKLINE Series MD is a motor driven, spring return mechanical diaphragm metering pump for precise and accurate metering control. With many standard features, the Series MD includes oil lubricated ball bearings in die-cast aluminum housing, long life reinforced PTFE diaphragm, micrometer style stroke length adjuster and... Read More

IPS Weld-On Solvent Cementing Tips for Hot Weather

June 1, 2015 – The Woodlands, TX – IPS Weld-On® continues to lead the industry in quality technical support and training. In anticipation of the upcoming summer season, the following are some useful tips on how to best handle solvent cement, primer and plastic pipe and fittings in hot weather conditions. Good joints can be... Read More

Tough Resistant IPS 724 Weld-On Cement

May 1, 2015 – The Woodlands, TX – Specifically formulated for joining CPVC and PVC industrial piping systems carrying corrosive chemicals, Weld-On 724™ is the most chemical resistant CPVC solvent cement in the industry.  Laboratory analysis showed no joint failure even after 2,500 hours of pressure tests in numerous chemical solutions. Weld-On 724™ is UPC... Read More

Chemtrol Offers Advantages Over Non-Plastic Materials

April 15, 2015 – The Woodlands, TX – Chemtrol thermoplastic pipe, valves, and fittings offer unique advantages over non-plastic materials. Flexibility—In underground installations, thermoplastic piping may be snaked in trenches to minimize the effects of expansion and contraction. Adaptability—A variety of joining techniques makes thermoplastic flow control systems adaptable to any field application; Thermoplastic piping... Read More

King StarLite XL – King Innovation Your Imagination

April 1, 2015 – The Woodlands, TX – King StarLite® XL is an economical cellular (closed cell) utility sheet made from select high-grade King StarBoard® recycled HDPE.  Designed initially  for boat parts as an upholstery substrate where edges are not visible, the innovation of King StarLite® XL has allowed our customers to use their unlimited... Read More

Pulsatron Series T7 Programmable Timer Pump

March 15, 2015 – The Woodlands, TX – The Pulsatron Series T7 programmable timer pump was designed to feed chemical products on a timed schedule for  conditions that do not require or have a controller available.  Typical applications include the feed of biocides in cooling towers. The feed cycle is initiated and controlled by the programmable... Read More

IPS Weld-On Quality Test-Tite® Test Plugs

March 1, 2015 – The Woodlands, TX – Test-Tite® is the first in the industry to offer a full line of pneumatic test plugs with pressure relief valves that release excess pressure into the atmosphere, reducing the risk of over inflation. Inflatable pneumatic test plugs are designed to provide temporary sealing in pipe systems for... Read More

SCIGRIP 1707 Adhesive Ideal for Bonding ABS Substrates

February 15, 2015 – The Woodlands, TX – SCIGRIP® 1707 ABS adhesive is specifically formulated for bonding ABS plastic only. The adhesive is a milky, syrupy consistency, medium bodied, fast drying solvent cement. It forms high strength bonds in joining ABS materials. The properties of its bonds are high strength, rigid, and generally free from... Read More

Gallina arcoPlus® 626 Modular System

February 1, 2015 – The Woodlands, TX – Gallina arcoPlus® 626 is a modular system of UV protected 6-wall polycarbonate panel with a thickness of 20mm and 600mm modular width. These are fixed to the existing structure using specific anchor brackets and joined together by a special click-on system. Advantages Easy and low-cost installation Light... Read More

Innovative Applications for King ColorCore® Polymer Sheets

January 15, 2015 – The Woodlands, TX – King ColorCore is a versatile, environmentally stabilized sheet with multiple layers of contrasting colors. Its thin cap layers and bright primary colors make it ideal for signage, marine, playground and recreational applications. King ColorCore® and ColorBoard® sheets have many new innovative applications including: Engraved tool storage boards... Read More

Chemtrol Releases Updated Plastic Piping Handbook

January 1, 2015 – The Woodlands, TX – Chemtrol recently celebrated their 60th Anniversary by releasing the latest edition of the popular Chemtrol Plastic Piping Handbook that was first published over 40 years ago. The handbook contains essential information for engineers, contractors and operators of industrial plastic piping systems.   The handbooks contain plastic piping system... Read More

Pulsatron Pumps Used in Fertigation Industry

December 15, 2015 – The Woodlands, TX – Pulsafeeder pumps have been successfully used in many chemical, wastewater, and water treatment applications. They are also successfully used in the fertigation industry. Fertigation is the process of injecting plant and soil nutrients into irrigation water to feed lightly with each drop of water. “We have used... Read More

Harrison Superduct® Solution for Corrosive Ventilation

December 1, 2014 – The Woodlands, TX – Harrison Machine & Plastic Superduct® piping systems are custom fabricated to specifications. Harrison Superduct® is offered from 2″ to 60″ and available in PVC, CPVC, PP, PVDF, and HDPE materials. A Harrison CPVC Superduct® system was installed at the new chemical research building at Texas A&M University.... Read More

Chemtrol Valves Used for Chemical Feed Systems

October 15, 2014 – The Woodlands, TX – Chemtrol’s True Union Ball Valves are an excellent choice for water treatment specialist and OEM’s fabricating chemical feed systems for the water treatment industry.  Chemtrol valves are used for reliable process control of the chemical feed systems. Features include:  250 psi rating at 73F—the highest in the... Read More

King StarBoard® HDPE Sheet Used in Water Treatment

October 1, 2014 – The Woodlands, TX – King Starboard® high-density polyethylene (HDPE) sheet is used extensively in the water treatment industry.  In the water treatment industry, panel mount pre-engineered skid systems are designed to control the process control and chemical feed systems. King StarBoard® sheet is the premier choice in the industry due to... Read More

Gallina arcoPlus® 547 Modular Panel Systems

September 15, 2014 – The Woodlands, TX – Gallina has been manufacturing and extruding polycarbonate and plastic profiles, sheets and building panels for over 50 years. arcoPlus® line of structural multiwall modular building panels are designed exclusively for vertical wall, skylighting, roofing, canopy applications or any application designed to improve daylighting. Gallina arcoPlus®547 is a... Read More

Foust Marketing Introduces New Website

September 8, 2014 – The Woodlands, TX – Foust Marketing is pleased to introduce our new website.  The new website will continue to be a resource for the latest information on the products and services offered by our company.  In addition, it now includes more features, graphics, and search engine optimization for increased sales opportunities.  We have also included a... Read More

King Plastic—King KPC ABS Ideal for Machining Applications

August 19, 2014 – The Woodlands, TX – The advantage of King KPC ABS is that this material combines strength and rigidity of the acrylonitrile and styrene polymers with the toughness of the polybutadiene rubber. A variety of modifications have been made to improve impact resistance, toughness and heat resistance. The impact resistance does not... Read More

Harrison Duct—Exhaust and Fume Systems

July 1, 2014 – The Woodlands, TX – Harrison Machine and Plastic duct systems are fabricated to your specifications. Harrison duct and piping is offered from 2″ to 60″.  Complete duct piping systems for air and pollution control are manufactured in PVC, CPVC, PP, HDPE materials, and available in round and rectangular duct for corrosion... Read More

IPS Weld-On®—How to Repair Leaking Joints

June 15, 2014 – The Woodlands, TX – IPS Weld-On continues to lead the industry with quality products, training, and education for PVC, CPVC, and ABS primers, solvent cements, and thread sealants. When proper installation techniques are not completely followed we recommend cutting the leaking fitting out and replacing the joint. When that is not... Read More

Chemtrol® CPVC Fittings Approved for Marine Applications

June 1, 2014 – The Woodlands, TX – Chemtrol®, a brand of NIBCO, is pleased to announce that Chemtrol CPVC Schedule 80 fittings are approved by the US Coast Guard and the American Bureau of Shipping for use in marine applications.  The material of construction is rigid CPVC (chlorinated polyvinyl chloride) used in the manufacture... Read More

Foust Marketing Partners with Gallina USA

April 1, 2014 – The Woodlands, TX – Gallina USA announces the addition of Foust Marketing to its sales organization. Foust Marketing will be responsible for sales coverage and market development in the states of Texas, Louisiana, Oklahoma, and Arkansas. The Director of Sales and Marketing of Gallina USA David Corbliss stated that “Foust Marketing was... Read More

Pulsafeeder—Chem-Tech XPV Peristaltic Metering Pump

March 30, 2014 – The Woodlands, TX – The Pulsafeeder Chem-Tech Series XPV pump combines the best in variable speed peristaltic pump technology with state of the art control electronics, providing unparalleled performance, control, and value. The Series XPV represents the leading edge of microprocessor performance management that allows a variety of choices of input... Read More

SCIGRIP® 45—High Strength Structural Adhesive

October 21, 2012 – The Woodlands, TX – SCIGRIP 45 is recommended for a variety of applications and industries including sign assembly, and fabrication uses where high bond strength and environmental resistance is required.  This adhesive is especially suitable for bonding aluminum, brass, copper, galvanized steel and other metals. Excellent adhesion is also obtained on... Read More

Harrison CPVC Duct Ideal for Corrosive Ventilation

July 1, 2012 – The Woodlands, TX – Harrison CPVC duct systems are produced from a CPVC Corzan® material with unique physical properties, making it a desirable product for fume, exhaust, and air handling duct systems. Harrison offers a complete line of seamless CPVC pipe and CPVC duct fittings from 2″ thru 24″ diameters. The... Read More

Pulsafeeder Pumps in Sulfuric Acid Application

June 25, 2012 – The Woodlands, TX – PULSAtron Series E Plus pumps feature automatic control available with 4-20 mA DC direct or external pacing, with stop function. It also offers manual control by on-line adjustable stroke rate and length. The photo is a sulfuric acid application where PULSAtron pumps were specified for their durability,... Read More

Bryan Foust Completes CPMR Certification Program

June 15, 2012 – The Woodlands, TX — Bryan Foust completes the CPMR Certification Program at Indiana University/Purdue University in Indianapolis.  The CPMR program is a three year program designed to provide knowledge and insight into operating a business more effectively and profitably. The customer has the assurance that CPMR designees know how to manage... Read More

SCIGRIP Assembly Adhesives Partners with Foust Marketing

May 1, 2012 – The Woodlands, TX — SCIGRIP announces the addition of Foust Marketing to its sales organization.  Foust Marketing will be responsible for sales and market development in the states of Texas, Louisiana, Oklahoma, Arkansas, Kansas, and Missouri.  The Sales and Marketing Director of SCIGRIP Karen Amoah stated that “Foust Marketing was our... Read More

NIBCO®—Chemtrol® Bleach Ball Valve

April 15, 2012 – The Woodlands, TX — Sodium hypochlorite, used in water treatment, aquatic centers, and industrial/chemical applications, can become trapped in the body cavity of a closed ball valve and create failure conditions as the unstable chemical decomposes.  Sodium hypochlorite has been found to cause stress cracking in polyethylene, polypropylene, and PVDF materials.... Read More

IPS®—Weld-On® 724 for Caustic Applications

April 1, 2012 – The Woodlands, TX – IPS®—Weld-On® 724 for Caustic Applications   Specifically formulated for joining CPVC industrial piping systems carrying corrosive chemicals, Weld-On 724™ is the most chemical resistant CPVC solvent cement in the industry. Laboratory analysis showed no joint failure even after 2,500 hours of pressure tests in numerous chemical solutions. ... Read More

Foust Marketing Receives Outstanding Sales Achievement Award

March 5, 2012 – The Woodlands, TX – Foust Marketing Receives Outstanding Sales Achievement Award   For the second straight year, the Foust Marketing team was presented with the Outstanding Sales Achievement Award. To qualify, the Pulsafeeder sales representative had to exceed previous year sales and meet a minimum annual growth goal set at beginning... Read More

King ColorBoard®—Now Available with King MicroShield®

February 10, 2014 – The Woodlands, TX – King MicroShield® is a non-toxic antimicrobial upgrade available in many King Plastic products. It helps our products stay cleaner between cleanings and inhibits the growth of product-damaging microorganisms. Unlike other antimicrobials, it retains its effectiveness for the lifetime of the sheet without leaching into the environment.  You... Read More

Chemtrol®—PVDF Kynar® for Tough Chemical Applications

February 1, 2012 – The Woodlands, TX – NIBCO, Inc. manufactures red and natural Chemtrol® PVDF Kynar® piping components. It is a tough, abrasion resistant fluorocarbon material that has a maximum service temperature of 280°F.  The basic PVDF resin is essentially transparent to ultraviolet (UV) radiation, and is not degraded by sunlight. However, the fluid... Read More

MicroVision Boiler Controller for Boiler Water Control

November 20, 2011 – The Woodlands, TX – The MicroVision Boiler Controller delivers comprehensive boiler water control with “plug & play” simplicity, at an outstanding value. This latest addition to the MicroVision family of controllers is configured specifically for boiler water control, and utilizes intuitive software which provides simple set-up, while providing state of the... Read More

King Plastic Now Offering ASTM E-84 Class A or B Flame Rating

October 25, 2011 – The Woodlands, TX – Protect Your Interests with ASTM E-84 Class A or B Flame Rated Polymer Sheets from King Plastic Corporation. Available in King StarBoard® Products, King Plasti-Bal® Partition Sheets, King ColorCore® and ColorBoard®. The ASTM E-84 test method is intended to compare the surface flame spread and smoke developed... Read More

Foust Marketing Celebrates 10th Anniversary

October 1, 2011 – The Woodlands, TX – The Foust Marketing team celebrates their 10th Anniversary in business at the Westin La Cantera Resort in San Antonio, TX.  We would like say Thank You to all our friends, families, customers, and manufacturers that have supported us over the years.  We are excited about our past... Read More

King Plastic CuttingBoard® XL—The Economical Alternative

September 1, 2011 – The Woodlands, TX – Keep your knives sharp and protect your customers with premium professional polymer cutting boards. The King CuttingBoard® family of products is a comprehensive set of NSF-approved polymer sheets for modern restaurant kitchens, supermarkets, butcher shops and food-processing facilities.  King CuttingBoard® sheets are available in two versions: Solid... Read More

Chemtrol® Model D Ball Valve Now Through 2” Diameter

August 1, 2011 – The Woodlands, TX – NIBCO, Inc has increased the size offering of its Chemtrol® Model D True Union Ball Valve through 2” port sizes.  The True Union Valve combines the best design features of the current, top-selling Model C with an increased 250 psi rating that now leads the industry. Additional... Read More

KPC—King Performance Commodities

July 1, 2011 – The Woodlands, TX – King Plastic Corporation introduces King Performance Commodities. What makes King KPC materials stand above the rest is the commitment to use the finest raw materials and state-of-the-art manufacturing processes. The quality control measures used in the production King KPC products ensures customers they are receiving the highest... Read More

Pulsafeeder Introduces New Pulsatron Series A Plus Pump

June 20, 2011 – The Woodlands, TX – Pulsafeeder is excited to introduce the New High Speed Pulsatron Series A Plus pump with the introduction of three new pump sizes at 250 SPM.  This new offering has gone through extensive testing and will deliver outstanding performance.  Compared to the existing A Plus sizes which stroke... Read More

Chem-Pure® — Natural Polypropylene for High Purity Applications

June 1, 2011 – The Woodlands, TX – Chem-Pure® Natural Polypropylene pipe, fittings and valves from NIBCO is the intelligent choice for transporting high purity or corrosive fluids in the electronics, biotech, pharmaceutical and foodstuffs industries. Ideal for deionized water and processes requiring clean, non-leaching characteristics. Chem-Pure® PP also provides Unpigmented for high purity applications... Read More

Pulsafeeder Panel Systems for Chemical Feed Systems

April 15, 2011 – The Woodlands, TX – Pulsafeeder’s wall mountable Panel Systems are designed to provide complete chemical feed solutions for chemical dosing applications. From economical, single pump and single port flow assembly packages to multiple pump panels with microprocessor-based controllers with in-line sensors, there is a panel mounted solution for your application. Panel... Read More

Harrison Machine and Plastic Corporation – High Quality Fabricated Fittings

April 1, 2011 – The Woodlands, TX – Since 1970, Harrison Machine and Plastic Corporation has been involved in the fabrication of plastics in the industrial market, where fluid and air handling systems are used in extremely corrosive environments.  Harrison Schedule 40 and 80 fittings are offered in both drainage and pressure patterns.  The pressure... Read More

NEW Weld-On® Industrial Grade Cements and Primers

August 1, 2010 – The Woodlands, TX- IPS® Corporation is proud to introduce the Industrial Grade line of Weld-On® solvent cements and primers. Specifically formulated to meet the needs of industrial applications, the Industrial Grade solvent cements contain a higher percentage of the most penetrating solvents and the highest quality resins, which when used in... Read More

NIBCO’s Corzan® CPVC Schedule 80 Fittings Gain ABS Type Approval by American Bureau of Shipbuilding

April 20, 2010 – The Woodlands, TX – NIBCO, Inc. is pleased to announce the ABS Type Approval for their Corzan® CPVC fittings for shipboard use.  This approval is for NIBCO Corzan CPVC Schedule 80 fittings ¼” through 12″. Plastic piping continues to gain acceptance for use on board ships due to its inherent corrosion... Read More

Foust Marketing Establishes Social Networking Sites

April 1, 2010 – The Woodlands, TX – Foust Marketing, Inc. establishes new social networking sites.  Foust Marketing has created new pages on Facebook, Twitter, LinkedIn, and YouTube.  New sites are designed as innovative way to communicate with our customers.  These sites will provide the latest information on the products and services offered by the... Read More

Pulsafeeder – Manufacturer of Quality Diaphragm and Peristaltic Pumps, Controllers, Systems and Accessories.

July 1, 2009 – The Woodlands, TX – Foust Marketing, Inc. has been appointed as manufacturer representative for Pulsafeeder, Inc. for Texas, Louisiana, Oklahoma, Arkansas, Kansas, and Missouri.  Pulsafeeder leads the industry with diaphragm and peristaltic chemical metering pumps, controllers, process control, and pre-engineered skid systems for the Chemical, Industrial, Municipal, and Water Conditioning Markets.... Read More

Bryan Foust Completes CSP Program

March 9, 2009 – The Woodlands, TX –  Bryan Foust with Foust Marketing recently completed the Certified Sales Professional (CSP) program at MRERF that gives a thorough understanding of consultative selling.  The training includes business creation to improved time and territory management; goal-setting to prospecting, and negotiation skills.  We are confident that this training will... Read More

King Plastic Corporation – Manufacturer of Quality Polymer Sheets, Slabs and Massive Shapes Since 1968

January 1, 2006 – The Woodlands, TX – Effective January 1, 2006, Foust Marketing, Inc. has been appointed as manufacturer representative for King Plastic Corporation  for Texas, Louisiana, Oklahoma, Arkansas, Kansas, Missouri, Mississippi, and New Mexico.  The addition of King Plastic Corporation is an excellent complement to our line of quality sheet, rod, and tube... Read More

Rental Tools – Complete Line of Large Diameter Installation Tools

March 1, 2005 – The Woodlands, TX –  Foust Marketing, Inc. is pleased to feature our complete line of large diameter installation tools.  We have recently purchased a complete set of IPS pipe and fitting tools.  We are carrying the 4″-12″ Pipe Puller, 14″-20″ Pipe Puller, and 4″-24″ Portable Power Beveller.  We encourage you to... Read More

NIBCO, Inc. – Chemtrol® – Ideas That Flow™

October 1, 2002 – The Woodlands, TX –  Effective October 1, 2002, Foust Marketing, Inc has been appointed as manufacturer representative for NIBCO, Inc. in Texas, Louisiana, Oklahoma, and Arkansas.  The addition of NIBCO, Inc is an excellent complement to our line of quality pipe, fittings, and valves.  We are excited about the addition of... Read More

IPS Corporation – The Leader in Innovative Products for the Plastic Pipe Industry

July 1, 2002 – The Woodlands, TX – Effective July 1, 2002, Foust Marketing, Inc has been appointed as manufacturer representative for IPS Corporation in Texas, Louisiana, and Oklahoma.  The addition of IPS is an excellent complement to our line of quality pipe, fittings, and valves.  We are excited about the addition of IPS and... Read More

Foust Marketing, Inc. – New Organization and Website

October 1, 2001 – The Woodlands, TX – Foust Marketing, Inc. establishes new organization and website.  Website will be designed as a launching point to view the latest information on the products and services offered by the company.  In addition, it will include useful links to its principals and customers. For More Information Contact: Foust... Read More